Eraser's Model WT40 Automatic Bench Wire Twister is used for twisting two or more wires at lengths up to 20 feet. The unit can twist together several small plain or terminated wires and is programmable to a desired number of twists per inch. The maximum material bundle should not exceed an equivalent of three 14 AWG (1.63mmø) insulated wires and twisting speeds are variable from 0 to 26 turns per second. The WT40 utilizes a custom holding/clamping device made to specifications individual to each application. Custom clamp is a required part and will require samples to determine proper clamp for application.

Portable wire twister model DCFT is used for neatly twisting together the ends of pre-stripped stranded wires.

Eraser's Model G10S Bench Wire Twister is used for many diverse twisting needs. The G10S can twist pre-stripped stranded wires, twist strands of two or more wires together, twist wrapped shields on coaxial cables and tighten the twist of already twisted wire. The G10S is supplied with one set of three twist length spacers to vary the twist length, depending on application needs. Twisting inserts can be ordered depending on wire size to be twisted.

Eraser's Model G10S Bench Wire Twister is used for many diverse twisting needs. The G10S can twist pre-stripped stranded wires, twist strands of two or more wires together, twist wrapped shields on coaxial cables and tighten the twist of already twisted wire. The G10S is supplied with one set of three twist length spacers to vary the twist length, depending on application needs. Twisting inserts can be ordered depending on wire size to be twisted.

The DCFH is a versatile wire twister for producing twisted pairs by twisting a looped wire. The speed is variable using the control on the power unit.