Replacement wrench for use on L1(AR2041, AR2042),L2S(AR2051, AR2052), PL3(AR2061, AR2062), L4(AR0180), IR0104 and IR1823 Chuck Assembly. (2 Required)

Packet of 25 coarse FybRglass® refills

One Nylon refill

Packet of 25 fine FybRglass® refills

One set of refills for BR4/F

Optional upper cutting blade for MMC200 made from high speed tool steel for longer life. For use with materials such as fiberglass and small mild steel materials.

One set of refills for BR4/C

Stick type brush with plastic protective covering that is cut back as brush wears. FybRglass® brush is manufactured from spun glass. Brush will not alter electrical properties or contaminate surfaces cleaned.

The 553 General Purpose FybRglass® Wheels come in a pair and they are used for 30-42 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application

The .008 General Purpose Fine Wire Stripping Wheel is sold singularly and 2 are required for use in the R1S. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .004 Very Fine Wire Stripping Wheel is sold singularly and 2 are required for use in the R1S. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .003 Extra Fine Wire Stripping Wheel is sold singularly and 2 are required for use in the D-Series. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .004 Very Fine Wire Stripping Wheel is sold singularly and 2 are required for use in the D-Series. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .005 Fine Wire Stripping Wheel is sold singularly and 2 are required for use in the D-Series. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .006 General Purpose Fine Wire Stripping Wheel is sold singularly and 2 are required for use in the D-Series. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .008 General Purpose Coarse Wire Stripping Wheel is sold singularly is a custom made item. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .008 General Purpose Coarse Wire Stripping Wheel is sold singularly and 4 are required for use in the PD9. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .008 General Purpose Coarse Wire Stripping Wheel is sold singularly and 2 are required for use in the D-Series. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .0118 Very Coarse Wire Stripping Wheel is sold singularly and 4 are required for use in the PD9. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .0118 Very Coarse Wire Stripping Wheel is sold singularly and 2 are required for use in the D-Series. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .008 General Purpose Coarse Wire Stripping Wheel is sold singularly and 2 are required for use in the PD2S. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .0104 Coarse Wire Stripping Wheel is sold singularly and 2 are required for use in the PD2S. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .0118 Very Coarse Wire Stripping Wheel is sold singularly and 2 are required for use in the PD2S. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

One fine brass refill for use with Metal Body Fine Brass Eraser {AA0048}.

The .006 General Purpose Fine Wire Stripping Wheel is sold singularly and 16 are required for use in the E200. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .0118 Very Coarse Wire Stripping Wheel is sold singularly and 16 are required for use in the E200. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .014 Extra Coarse Wire Stripping Wheel is sold singularly and 16 are required for use in the E200. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .008 General Purpose Coarse Wire Stripping Wheel is sold singularly and 2 are required for use in the E200. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .0118 Very Coarse Wire Stripping Wheel is sold singularly and 2 are required for use in the E200. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .014 Extra Coarse Wire Stripping Wheel is sold singularly and 2 are required for use in the E200. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application and these include: wire size, type of insulation, strip length, number of wires stripped at one time, etc. For this reason, we suggest you send a sample of your wire so we may test it in our laboratory to provide you with the most efficient and economical grade of wheel [send us a 3 foot (1m) sample of wire with strip length and number of wires to be stripped at one time].

The .016 Nylon Comb Wheel is sold singularly and 8 are required for use in the D-Series. All of our Nylon Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .006 General Purpose Fine Wire Stripping Wheel is sold singularly and 10 are required for use in the D-Series. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .008 General Purpose Coarse Wire Stripping Wheel is sold singularly and 10 are required for use in the D-Series. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The .0118 Very Coarse Wire Stripping Wheel is sold singularly and 10 are required for use in the D-Series. All of our Wire Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 201 Coarse FybRglass® Wheels come in a pair and they are used for 26-30 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 553 General Purpose FybRglass® Wheels come in a pair and they are used for 30-42 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 553 General Purpose FybRglass® Wheels come in a pair and they are used for 30-42 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 640 Fine FybRglass® Wheels come in a pair and they are used for 35-45 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 553 General Purpose FybRglass® Wheels come in a pair and they are used for 30-42 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 640 Fine FybRglass® Wheels come in a pair and they are used for 35-45 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

Replacement Fuse for use on HTS1C, HTS2C, HCA20, MH10, MH10L and DCFA (110V & 220V) Series.

The 201 Coarse FybRglass® Wheels come in a pair and they are used for 26-30 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 640 Fine FybRglass® Wheels come in a pair and they are used for 35-45 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 141 Extra Coarse Wobble FybRglass® Wheels come in a pair and they are used for 24-26 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 640 Fine Wobble FybRglass® Wheels come in a pair and they are used for 35-45 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 553 General Purpose Beveled FybRglass® Wheels come in a pair and they are used for 30-42 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 640 Fine Beveled FybRglass® Wheels come in a pair and they are used for 35-45 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 201 Coarse FybRglass® Cone Wheels come in a pair and they are used for 28-30 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 553 General Purpose FybRglass® Wheels come in a pair and they are used for 30-42 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 141 Extra Coarse FybRglass® Wheels come in a pair and they are used for 24-26 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

The 141 Extra Coarse Beveled FybRglass® Wheels come in a pair and they are used for 24-26 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

Single Replacement Stripping Blade for use with RI2053; RI2047 Cutterheads, used for Stripping Jacket and Braid. (Use Blade RI6711 for Conductor Strip)

The DE700 compensating dereeler prevents material over-runs when used with wire cutters or cut and strip machines. The dereeler provides fine adjustment control on the reel payout tension by means of a clutch.

Wheel dresser and handle for twin wheel strippers with wheels over 1" (25mm) wide. For use with D1, DV1, D9 and D109.

Packet of 10 wheel dresser refills for use with wheel dresser for twin wheel strippers with wheels over 1" (25mm) wide.

Packet of 10 wheel dresser refills for use with wheel dresser for twin wheel strippers with wheels under 1" (25mm) wide. For use with AR2901

A bench mounted dereeler or reeler. Unit adjusts for reel hub diameter for various sizes up to 50lb.

The FE1 Fume Extractor is a compact and powerful unit designed to extract fumes or smoke caused by thermal wire stripping operations, soldering and de-soldering operations, or other similar applications. An optional 4” OD (102mmø) flange is available to enable the FE1 to be connected to an existing ventilation system for external exhaust. Because the FE1 is all metal construction and is grounded it will not generate static electricity which can damage sensitive components. Use of this unit is recommended when using Models BTS, HTS, MH10 and A5C Thermal Strippers.

A/C to D/C Power Supply 110V for use with RC2000.

Photographic type floor stand with vertical adjustments from 26" to 63" from the floor and full swivel and tilt head.

Two pound (908g) bag of Dip Strip. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed stripping pot, Dip Strip melts and wires are immersed in the molten Dip Strip to strip the insulation. Note: Contact Eraser's Customer Service Department for shipping information.

One pound (454g) bag of Dip Strip. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed stripping pot, Dip Strip melts and wires are immersed in the molten Dip Strip to strip the insulation. Note: Contact Eraser's Customer Service Department for shipping information.

Secondary Stop for LSA20 (AR6800) and LSAR20 (AR6700).

Main Stop for LSA20 (AR6800) and LSAR20 (AR6700).

Element Guard for Model BTS1 Thermal Stripper {AR0111, AR0112}.

The 201 Coarse FybRglass® Wheels come in a pair and they are used for 26-30 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Bullet nose insert for use in confined areas. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

The 141 Extra Coarse FybRglass® Wheels come in a pair and they are used for 30-42 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

Set of Custom Bushings for use on the WC601B Rotary Blade Tubing Cutter {AR7131, AR7132}.

Set of Custom Bushings for use on the WC601B Rotary Blade Tubing Cutter {AR7131, AR7132}.

Steel cutting blade for Model RTC1 Rigid Tubing Cutter (2 required per machine).

Optional drive roller for use with Models WC300, WC301 & WC302 Automatic Wire & Tubing Cutter(s).

Replacement plexiglass guard for AA0125/AA0126 (ECT1)

Replacement protective vinyl tips for AA0125/AA0126 (ECT1)

Optional foot switch for bench model

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500F (815C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.

One pair of 1" (25.4mm) Bench Glo-Ring wire guards

One pair of 2" (50.8mm) Bench Glo-Ring wire guards

One pair of 3" (76.2mm) Bench Glo-Ring wire guards

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Dimension of internal diameter of elements is in the closed position. Continuous elements must befitted if unit is to remain on for more than 2 minutes.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500F (815C). Dimension of internal diameter of elements is in the closed position. Continuous elements must befitted if unit is to remain on for more than 2 minutes.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500F (815C). Dimension of internal diameter of elements is in the closed position. Continuous elements must befitted if unit is to remain on for more than 2 minutes.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500F (815C). Dimension of internal diameter of elements is in the closed position. Continuous elements must befitted if unit is to remain on for more than 2 minutes.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500F (815C. Dimension of internal diameter of elements is in the closed position.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Dimension of internal diameter of elements is in the closed position. Continuous elements must befitted if unit is to remain on for more than 2 minutes.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500F (815C). Dimension of internal diameter of elements is in the closed position.Continuous elements must befitted if unit is to remain on for more than 2 minutes.

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Dimension of internal diameter of elements is in the closed position. Continuous elements must befitted if unit is to remain on for more than 2 minutes.

One pair of 1/2" (12.7mm) wire guards

Individual replacement “snap-in” 500 watt Tubular Quartz heat lamp assembly

Lamp assembly, 1000 watts 230-250 volts. For use with AK-0013 (IMX) modules.

Lamp assembly 1600 watts 230-250 volts. For use with AK-0021 (IMZ) Modules

Lamp assembly 2000 watts 230-250 volts for use with AK-0013 (IMX) modules

Complete set of twenty-two wire guides.

Chuck assembly for 3/8" (9.52mmø) diameter inserts for use with Models L2S, L4 and PL3S wire strippers.

Chuck assembly for 1/2" (12.7mmø) diameter collet assembly for Models L2AS and L4A

Blades for extruded type insulations. USE ONLY FOR WIRES WITH HARD OR THIN INSULATION. Flat front blades (set of four) for 38-8 AWG (0.10-3.25mmø) wires or up to 3/8” (9.5mmø) diameter over insulation.

Set of four blades for film and magnet wire. Wire sizes 11-15 AWG (2.31-1.45mmø)

Set of four blades for film and magnet wire. Wire sizes 16-20 AWG (1.30-0.81mmø)

Set of four blades for file and magnet wire. Wire sizes 25-28 AWG (0.46-0.33mmø)

Spider assembly less blades for wires from 11-24 AWG (2.31-0.51mmø)

Blades for all extruded type insulations. USE ONLY FOR THICK OR RUBBERY INSULATIONS. MACHINE MUST BE USED IN COUNTER CLOCKWISE ROTATION. Blades with relief (set of four) for 38-8 AWG (0.10-3.25mmø) wires or up to 3/8” (9.5mmø) diameterover insulation.

Guard for Model APF100 {AR6201, AR6202}.

Optional Bench Stand for use with reelers, dereelers and measuring meters

Optional Floor Stand for use with measuring meters and dereelers

Optional Urethane Feed Rollers for use on WC500; designed to eliminate marking on the insulation.

Guard for Model C100S Rotary Wire Stripper {AR2171, AR2172}.

Wire stripper faceplate assembly for Models C200 and C300

Footswitch kit enabling DCF hand models (except those with integral vacuum) to be used as bench models.

Custom cut plate for WC300 and WC301. Send material for sizing.

Parallel blades compatible with Eraser models: LS10, LSR10, LSS10, LSA20, and LSAR20.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Die blade for stripping round wires and cables.

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Standard 50° blade with pivot pin.

Blade for applications where insulation wall thickness is very thin, almost a film of insulation

Set of replacement un-notched elements. General purpose heavy duty “flat style” elements un-notched for wires sizes 25AWG to 43AWG (0.46-0.056mmø). Width of elements 0.500 (12.7mm)

Set of replacement notched elements. General purpose heavy duty “flat style” elements notched for wire sizes 12AWG to 24AWG (2.06-0.51mmø). Width of elements.500"(12.7mm).

Optional Urethane drive roller for use with Models WC300, WC301 & WC302 Automatic Wire & Tubing Cutter(s) to eliminate markings on insulations.

Variable speed power unit for use with all DCF Models. Multi-voltage 115/220/240V 50/60Hz

One pair of replacement elements.

Special short blade for very fine fragile wires.

A complete set of wire entry guides 1-37 in a plastic box

Blade setting fixture for DCF1 stripping blades.

Optional Adjustable Bench Mounting Stand for use on the WS1 Wire Straightener {AR3950}.

Optional carbide "V" blade set for use on the CS800 (AR7201, AR7202).

Optional carbide cutting blade for use on RTC1 (2 required per machine).

Set of two for twisting 22-26 AWG (0.64-0.41mmø)wire

Set of two for twisting 18-24 AWG (1.02-0.51mmø)wire

Set of two for twisting 12-18 AWG (2.06-1.02mmø)wire

Blade setting fixture for DCF 2/3 stripping blades.

Blade setting fixture for DCF4 stripping blades.

Set of two replacement carbide blades for use with C200 and C300

Set of six replacement carbide blades for use with C200 and C300.

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Wire Guide

Conversion kit to change HC10 to FC10

Safety Guard for Model C300 (AR9501, AR9502) Triple Head Wire Stripper, - (3 required).

Custom steel bushing. Send cable sample for proper sizing.

Pack of three replacement filters for use with FE1.

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Length Stop Rod.

Standard cut bushing for use on Model WC302 Automatic Wire & Tubing Cutter (AR7211).

Combination of air filter, regulator and lubricator.

Set of three blades for use on DCF2/3, DCF2/3L, DCFV2/3, DCFV2/3L

Set of three blades for use on DCF1, DCF1L, DCFV1, DCFV1L

Quick release coupling for use with Model 1246 (RC1051, RC1052, RC1058) and Model 1256 (RC1071, RC1068).

Wheel dresser for twin wheel strippers with wheels under 1" (25mm) wide. For use with R1S, RT2, RT2S, ST1.

Replacement hand piece (with power cord) for use with RI0056 and RI0057 A/C to D/C power supply.

The 553 General Purpose Wobble FybRglass® Wheels come in a pair and they are used for 30-42 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

Standard battery pack with charger for 110V. The standard battery pack provides approximately two hundred strips per charge. For use with RC2000.

Battery Charger, Europe (except UK)

Battery Charger 110V

Kit to extend capacity of DE400 from 6" (152mm) wide to 10" (254mm) wide reels.

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Bullet nose insert for use in confined areas. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in three grades of material- heavy duty and Tungsten Carbide, and Diamond tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. diamond is better than carbide, is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

Replacement blade(moveable)for Model HCA20

Replacement blade for HC10 and FC10

Replacement blade and pin assembly for use on HC10 and FC10

Single replacement carbide blade for use with Model C200(AR4901, AR4902) and Model C300 (AR9501, AR9502).

Clear Guard for Model CS800 Wire Cut & Strip {AR7201, AR7202}.

For use on Model C100S

Clamping tube for WT20

Clamping tube for WT20

Clamping tube for WT20

The .0118 Very Coarse Encapsulated Urethane Stripping Wheel is sold singularly and 16 are required for use in the E200. Encapsulated brushes use an elastomer which firmly supports the individual wire tips, producing stronger brushing action and longer life. In use, the elastomer wears back gradually, presenting a shorter wire tip for maximum cut. These wheels can be used singly or mounted in multiples to create a wider brushing face. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of wheel for a specific wire stripping application. These include wire size, type of insulation, strip length, and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

Machined Guard for Model LS10 Cable Stripper {AR0240}.

Encapsulated brushes use an elastomer which firmly supports the individual wire tips, producing stronger brushing action and longer life. In use, the elastomer wears back gradually, presenting a shorter wire tip for maximum cut. These wheels can be used singly or mounted in multiples to create a wider brushing face. For use on D-Series (excpet D-109).

Replacement hand piece for use on DCF Series Magnet Wire Strippers {AR4300, AR4400 and AR4500}.

One standard feed belt coated with a 55A polyurethene coating. Optional for use with Models WC601A, WC601B, AR7121, AR7122, AR7131 and AR7132. Two required per machine.

Custom blade set for LS Series Models

Custom Blades for Models K8A, K8B, IK8 and IK10

Twisting Head for Model G10S Wire Twister

Optional adjustable bench stand for the WS-1 for use with CS800 Cut & Strip.

Wire Entry Guide for WT20

Wire Entry Guide for WT20

Wire Entry Guide for WT20

Replacement Blade Alignment Tool for use on C200 and C300.

1/4" (6.35mm) thick

1/2" (12.7mm) thick for use with G10S

1/8" (3.18mm) thick

Replacement Length Stop Rod for use on L2 and L1 Series Machines. .

Replacement Spindle Nut Right Hand for use on ST1 and R1S.

Replacement Feed Belt for use on the CS800 Cut & Strip and APF100 Prefeeder.

Set of Standard Bushings.035 ID for CS800.

Set of standard bushings.098 ID for use on the CS800.

Set of standard bushings.116 ID for use on the CS800.

Set of standard Bushings.250 ID for the CS800.

Blade alignment tool for use on the CS800.

Chuck assembly for 3/8" (9.52mm) diameter inserts for use with the L1.

Replacement "V" blade set for use on the CS800 (AR7201, AR7202).

Optional carbide blade for use with models WC600D (AR101, AR7102), WC601D (AR7151, AR7152) and FTC1 (AR1421, AR1422) Cutters.

For use on AR0610, AR0620, AR0630, AR0640, AR0650 and AR0660

Set of three blades for use on DCF4, DCF4L, DCF4V, DCFV4L

Two level cutter head for semi-rigid coax for use on RC2000 and RC2001 (824).

Set of standard 1/4" ID bushings for WC600A and WC601A.

Set of standard 1/8" ID bushings for WC600A and WC601A.

Single level cutter head for semi-rigid coax for use on RC2000 and RC2001 (824).

Set of standard 3/8" ID bushings for WC600A and WC601A.

Single level cutter head for coax for use on RC2000 and RC2001 (824).

Two level cutter head for coax for use on RC2000 and RC2001 (824).

Two level cutter head for coax with braid exposed for use on RC2000 and RC2001 (824).

Three level cutter head for coax for use on RC2000 and RC2001 (824).

Single level cutter head for semi-rigid coax for use on RC1051, RC1052, RC1058, RC1071, RC1068 (Models 1246 & 1256).

Two level cutter head for semi-rigid coax for use on RC1051, RC1052, RC1058, RC1071, RC1068 (Models 1246 & 1256).

Single level cutter head for coaxfor use on RC1051, RC1052, RC1058, RC1071, RC1068 (Models 1246 & 1256).

Two level cutter head for coax for use on RC1051, RC1052, RC1058, RC1071, RC1068 (Models 1246 & 1256).

Two level cutter head for coax with braid exposed for use on RC1051, RC1052, RC1058, RC1071, RC1068 (Models 1246 & 1256).

Three level cutter head for coax for use on RC1051, RC1052, RC1058, RC1071, RC1068 (Models 1246 & 1256).

Head with blades used on DCF1, DCF1L

Head with blades used on DCF2/3, DCF2/3L

Head with blades used on DCF4, DCF4L

Rasp head for flat and rectangular wires for use on DCFR, DCFAR

Twisting hook head used on DCFH, DCFHL

Twisting head for stranded wires for use with DCFT, DCFTL

Set of Standard Bushings.151 ID for use on the CS800.

Option custom bushings 1/64" - 1/32" (0.381mmø-0.793mmø)for WC600A and WC601A. Send material for sizing.

Replacement Blade Return Spring Right Hand; for use on C200, C300 (AR4901, AR4902, AR9501, AR9502)

Replacement blade return spring left hand; for use on C200, C300 (AR4901, AR4902, AR9501, AR9502)

Replacement idler pulley to fan pulley V belt for use on DV1.

Set of Standard Bushings.057 ID for use on the CS800.

A/C to D/C Power Supply 220V for use with RC2001.

Replacement cut blade for use on Model WC302 Automatic Wire & Tubing Cutter (AR7211).

A single replacement blade for use with Acc Cutterheads except Semi-Rigid.

Carbide cutting blade for use with Model WC300 and WC301

A single replacement blade for use with semi-rigid coax cutter heads.

A blade for cutting flexible tubing for use with Models WC600, WC600A, and WC601A

Cutter head for cable Diameter from.350"-.445" (8.89mmø-11.30mmø) UV or V size hole for a 1, 2 or 3 level strip for use on RC1051, RC1052, RC1058, RC1071, RC1068 (Models 1246 & 1256).

Cutter head for strip lengths from.050"-.070" (1.27mm-1.78mm) between blades for a 2 level strip for use on RC1051, RC1052, RC1058, RC1071, RC1068 (Models 1246 & 1256).

Cutter head for cable Diameter from.350"-.445" (8.89mmø-11.30mmø) UV or V size hole for a 1, 2 or 3 level strip for use on RC2000 and RC2001 (824)

Cutter head for strip lengths from.050 -.070" (1.27 -1.78) between blades for a 2 level strip for use on RC2000 and RC2001 (824)

Cutter head for stripping 735 coax for use with Kings connectors and used on RC2000 and RC2001 (Model 824)

Cutter head for stripping 734 coax for use with Kings connectors and used on RC2000 and RC2001 (824)

Cutter head for stripping 735 coax for use with Trompeter connectors and RC2000 and RC2001 (824)

Cutter head for stripping 734 coax for use with Trompeter connectors for use with RC2000 and RC2001 (824).

Cutting blade for center cuts for use with MR30A (DE0009) portable air operated cutter. Blade cuts 0.130ø copper, 0.110ø mild steel and.047ø piano wire.

Carbide tipped cutting blade for diagonal cuts for use with MR30A (DE0009) portable air operated cutter. Blade cuts 0.130ø copper, 0.110ø mild steel and 0.047ø piano wire.

One pair of holding/mounting clips for use with infrared sealed beams.

Diamond tipped flat face insert for close-up stripping. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Diamond tipped flat face insert for close-up stripping. Insert Selection: Most inserts are available in three grades of material- standard, heavy duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty, is better than standard). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

Replacement standard battery without charger for use with RC2000, RC2001.

Replacement standard shears for WC2, WC2M

Set of Custom Bushings for RTC1 Rigid Tubing Cutter (AR1411, AR1412). Send material for sizing.

Replacement modified tubing cutting shears for WC2M.

Optional roller for Models WC300, WC301 and WC302 Automatic Wire & Tubing Cutter(s).

Replacement drive roller for use on Models WC300, WC301, WC302 and WC600 Automatic Wire & Tubing Cutter(s).

Replacement lower cutting blade for MMC200

Set of custom bushings 1/16" - 1/8" (1.60mmø-3.175mmø)for WC600A and WC601A. Send material for sizing.

For use with ceramic heaters

Replacement cut plate for WC300 and WC301.

One optional front carbide blade for use with Model HCA20

One moveable straight carbide blade for use with Model HCA20

Replacement upper cutting blade for MMC200

Replacement standard tool steel cutting blade for Models AR7131; AR7132; AR7401; AR7402; AR7403; AR7901; AR7902; AR7903

Replacement carbide cutting blade for Models AR7901; AR7902; AR7131; AR7132 (WC601B, WC600C)

Replacement ceramic cutting blade for Models AR7901; AR7902; AR7131; AR7132 (WC600C WC601B)

Replacement Collet for L1 Bench Wire Stripper.

Replacement collet for use on Models L2S, PL3S and L4 wire strippers.

Optional lower cutting blade for MMC200 made from high speed tool steel for longer life. For use on fiberglass or small mild steel materials.

One coarse FybRglass® refill for use with E111/C Metal Body Coarse FybRglass® Eraser (AA0020) & Industrial Coarse Eraser (AA2020).

One stainless steel refill for use with Industrial Fine Eraser (AA2120).

Fifty pound (22.6kg) bag of Dip Strip. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed stripping pot, Dip Strip melts and wires are immersed in the molten Dip Strip to strip the insulation.

Optional set of two elements with 4 die holes for 14, 16, 18 and 20 gauge wires. There is no need to rotate the stripper when using this set of elements. The set contains 4 mounting screws and washers.

Optional set of two elements with 5 die holes for 22, 24, 26, 28 and 30 gauge wires. There is no need to rotate the stripper when using this set of elements. The set contains 4 mounting screws and washers.

The Dip Strip Neutralizer Kit is a safe, economic method to dispose of Dip Strip and Ultrafine Stripper after use in DSP and USP Stripping Pots. This Kit contains one 2 gallon pail and one pound of our special Neutralizer that changes color when DipStrip is neutralized.

Replacement one pound bag of Dip Strip Neutralizer for use with PR1403 Dip Strip Neutralizer Kit.

Replacement head removal tool for use with all DCF units.

Variable speed bench power supply for use with all 110V DCFA, DCFB units.

Optional carbide blade for longer life than standard steel blades. For use on HC10 and FC10 cutters.

Optional carbide blade for longer life than standard steel blade. For use on HC10 and FC10 cutters.

Replacement wire and tubing blade for use on WC300 and WC301. One needed per machine.

Replacement wrench for use on L2AS(AR2071, AR2072), L4A(AR0190) and Chuck Assembly (IR0106). (2 Required)

Set of three replacment twisting fingers for use on DCFT units.

The 640 Fine Cone FybRglass® Wheels come in a pair and they are used for 35-48 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

Replacement Hand Driver for Model 824 Portable Coaxial Cable Stripper (RC2000, RC2001).

(1) U.S. pint of Dip Clean 2 Metal Cleaner. For use with DSP and USP Stripping Pots and Dip Strip. After stripping using Dip Strip, the stripped wires are then rinsed in water and Dip Clean 2 Metal Cleaner to remove oxides and stripping residue.

Replacement nose cone for use with DCFA and DCFB hand units.

(1) U.S. gallon of Dip Clean 2 Metal Cleaner. For use with DSP and USP Stripping Pots and Dip Strip. After stripping using Dip Strip, the stripped wires are then rinsed in water and Dip Clean 2 Metal Cleaner to remove oxides and stripping residue.

Replacement clean guard for use on nose cone of DCFA and DCFB hand units.

Set of custom bushings for use with WC600D (AR7101, AR7102)and WC601D (AR7151, AR7152). Send material for sizing.

Replacement cutting blade for use with WC600D (AR7101, AR7102), WC601D Cutters (AR7151, AR7152) and FTC1 Flexible Tube Cutters(AR1421, AR1422).

Timing feed belt for use with WC600D (AR7101, AR7102) and WC601D (AR7151, AR7152). Two (2) required per machine.

Flat belt for use with WC600D (AR7101, AR7102), WC601D (AR7151, AR7152), FTC1 (AR1421, AR1422) and LFTC1 (AR1431, AR1432). One (1) required per machine.

The 553 General Purpose Cone FybRglass® Wheels come in a pair and they are used for 30-42 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

Replacement guide 3/8" for use on the APF100 Prefeeder (AR6201 & AR6202). Two required per machine.

One brass refill for use with Metal Body Coarse Brass Eraser (AA0004).

One fine FybRglass® refill for use with E111/F Metal Body Fine FybRglass® Eraser (AA0120) & Industrial Fine Eraser (AA2120).

Replacement Nose Cone for use with all DCF units except DCFV, DCFA, DCFB.

Replacement Blade Guard for use with all DCF units except DCFV, DCFA, DCFB.

Replacement Idler Pulley for use on all D Series Machines.

Replacement Space Regulating Screw for use on all D Series and E Series Machines.

Replacement Stripping Blade for Thin Insulation for use on CM20.

Replacement Digital Counter for use on Measuring Meters. Measures in Feet/Inches.

Replacement Digital Counter for use on Measuring Meters. Measures in Meters.

Replacement Guard for use on L2S, L2AS and L1.

Replacement Extractor for use on DSP Stripping Pots.

Replacement Table and Clamp assembly for use on LSA20.

Replacement guide 1/4" for use on the APF100 Prefeeder (AR6201 & AR6202). Two required per machine.

Replacement Front Guide for use on IK8 and IK10.

Replacement Head Guard for use on PL3S.

The 553 General Purpose FybRglass® Wheels come in a pair and they are used for 30-42 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length