Replacement Parts

Floor Stand for HL-2

Floor Stand for HL-2 Part Number: BK0001    

Photographic type floor stand with vertical adjustments from 26″ to 63″ from the floor and full swivel and tilt head.

Dip Strip

Dip Strip Part Number: BR1301    

Two pound (908g) bag of Dip Strip. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed stripping pot, Dip Strip melts and wires are immersed in the molten Dip Strip to strip the insulation. Note: Contact Eraser’s Customer Service Department for shipping information.

Dip Strip

Dip Strip Part Number: BR1302    

One pound (454g) bag of Dip Strip. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed stripping pot, Dip Strip melts and wires are immersed in the molten Dip Strip to strip the insulation. Note: Contact Eraser’s Customer Service Department for shipping information.

Secondary Stop

Secondary Stop Part Number: TR5066    

Secondary Stop for LSA20 (AR6800) and LSAR20 (AR6700).

Main Stop

Main Stop Part Number: TR5065    

Main Stop for LSA20 (AR6800) and LSAR20 (AR6700).

Element Guard

Element Guard Part Number: TR1476    

Element Guard for Model BTS1 Thermal Stripper {AR0111, AR0112}.

201 Coarse FybRglass® Wheels (Pair)

201 Coarse FybRglass® Wheels (Pair) Part Number: AE0063    

The 201 Coarse FybRglass® Wheels come in a pair. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

L30HC Concave Face Insert

L30HC Concave Face Insert Part Number: IR1951    

Concave face inserts permit easy wire entry.  Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty).  Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

L30HF Flat Face Insert

L30HF Flat Face Insert Part Number: IR1961    

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L35HC Concave Face Insert

L35HC Concave Face Insert Part Number: IR1952    

Concave face inserts permit easy wire entry.  Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty).  Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

L35HF Flat Face Insert

L35HF Flat Face Insert Part Number: IR1962    

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L31HC Concave Face Insert

L31HC Concave Face Insert Part Number: IR1953    

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

L31HF Flat Face Insert

L31HF Flat Face Insert Part Number: IR1963    

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L33HC Concave Face Insert

L33HC Concave Face Insert Part Number: IR1954    

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

L33HF Flat Face Insert

L33HF Flat Face Insert Part Number: IR1964    

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L38HC Concave Face Insert

L38HC Concave Face Insert Part Number: IR1955    

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L38HF Flat Face Insert

L38HF Flat Face Insert Part Number: IR1965    

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L34HC Concave Face Insert

L34HC Concave Face Insert Part Number: IR1956    

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas

L34HF Flat Face Insert

L34HF Flat Face Insert Part Number: IR1966    

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L37HC Concave Face Insert

L37HC Concave Face Insert Part Number: IR1957    

Concave face inserts permit easy wire entry. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

LoadingUpdating…
© Copyright 2019 - The Eraser Company, Inc