Replacement Parts

L37HF Flat Face Insert

L37HF Flat Face Insert Part Number: IR1967    

Flat face insert for close-up stripping. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L35HB Bullet Nose Insert

L35HB Bullet Nose Insert Part Number: IR1982    

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L40HC Concave Face Insert

L40HC Concave Face Insert Part Number: IR1959    

Concave face inserts permit easy wire entry. Insert Selection: Inserts are available in Heavy Duty grade.  Concave face permits easy wire entry. Flat face permits better stripping flush to coil body.

L39HC Concave Face Insert

L39HC Concave Face Insert Part Number: IR1958    

Concave face inserts permit easy wire entry. Insert Selection: Inserts are available in Heavy Duty grade.  Concave face permits easy wire entry. Flat face permits better stripping flush to coil body.

L39HF Flat Face Insert

L39HF Flat Face Insert Part Number: IR1968    

Flat face insert for close-up stripping.  Insert Selection: Inserts are available in Heavy Duty grade.  Concave face permits easy wire entry. Flat face permits better stripping flush to coil body.

L40HF Flat Face Insert

L40HF Flat Face Insert Part Number: IR1969    

Flat face insert for close-up stripping.  Insert Selection: Inserts are available in Heavy Duty grade.  Concave face permits easy wire entry. Flat face permits better stripping flush to coil body.

L30HB Bullet Nose Insert

L30HB Bullet Nose Insert Part Number: IR1981    

Bullet nose insert for use in confined areas. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L31HB Bullet Nose Insert

L31HB Bullet Nose Insert Part Number: IR1983    

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L33HB Bullet Nose Insert

L33HB Bullet Nose Insert Part Number: IR1984    

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L38HB Bullet Nose Insert

L38HB Bullet Nose Insert Part Number: IR1985    

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

L34HB Bullet Nose Insert

L34HB Bullet Nose Insert Part Number: IR1986    

Bullet Nose insert for use in confined areas. Insert Selection: Most inserts are available in two grades of material- Heavy Duty and Tungsten Carbide tipped. Under normal use in a cost basis, the most expensive grade will give the best cost versus insert life (i.e. carbide is better than heavy duty). Concave face permits easy wire entry. Flat face permits better stripping flush to coil body. Bullet nose permits stripping in confined areas.

141 Extra Coarse FybRglass® Wheels (Pair)

141 Extra Coarse FybRglass® Wheels (Pair) Part Number: AE0353    

The 141 Extra Coarse FybRglass® Wheels come in a pair and they are used for 24-26 AWG wire. All of our FybRglass® Stripping Wheels are manufactured in house to ensure the highest standards of quality and delivery. We make stripping wheels to fit all competitive machines as well as for all Eraser Models. We can also manufacture custom size wheels. There are many factors that determine the proper grade of FybRglass® wheel for a specific wire stripping application. These include wire size, type of insulation, strip length and number of wires stripped at one time. For this reason, we suggest you give us a call, to determine the proper grade for your application.

Custom Bushing Set

Custom Bushing Set Part Number: IR1871    

Set of Custom Bushings for use on the WC601B Rotary Blade Tubing Cutter {AR7131, AR7132}.

Custom Bushing Set

Custom Bushing Set Part Number: IR1872    

Set of Custom Bushings for use on the WC601B Rotary Blade Tubing Cutter {AR7131, AR7132}.

Steel Cutting Blade

Steel Cutting Blade Part Number: IR1832    

Steel cutting blade for Model RTC1 Rigid Tubing Cutter (2 required per machine).

Drive Roller Knurled

Drive Roller  Knurled Part Number: TR5169    

Optional drive roller for use with Models WC300, WC301 & WC302 Automatic Wire & Tubing Cutter(s).

Replacement protective vinyl tips

Replacement protective vinyl tips Part Number: IA0743    

Replacement protective vinyl tips for AA0125/AA0126 (ECT1)

Foot Switch

Foot Switch Part Number: IH0129    

Optional foot switch for bench model

3″ Straight Element

3″ Straight Element Part Number: IH0130    

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes.

1/2″ Intermittent Element (Pair)

1/2″ Intermittent Element (Pair) Part Number: IH3511    

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500F (815C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.

LoadingUpdating…
© Copyright 2019 - The Eraser Company, Inc