Technical Information Center

RT2S Magnet Wire Stripper

Machine will not strip wires
Check that wheel grade is correct
Check dressing of wheels
Are wheels worn out? If so, replace
Check both wheels are being driven by drive belts.
Check wheel separation setting
Machine does not run or wheels won’t spin
Check fuse in power module fuse drawer at rear of machine and replace as necessary.
Check drive belts of machine.
Check to make sure the wheels aren’t pushed too far down on the spindles.
Machine breaks wires
Check wheel dressing
Check wheel separation
Check that wires are not kinked as this will cause breaks.
Check that wheel grade is correct
RT2S Product Page
Download Operating Manual
Technical Documentation: Rt2S Magnet Wire Stripper

Can’t find your answer above?

* Required Fields
Technical Assistance

© Copyright 2024 ∙ The Eraser Company, IncFAQ'sPrivacy Statement