Technical Information Center

1256 Bench Coaxial Cable Stripper

Strip is not deep enough
Adjust blade depth screws on cutter head clockwise.
Increase driver “on” time.
Strip is too deep
Adjust blade depth screw on cutter head counter clockwise.
Decrease driver “on” time.
Strips are inconsistent
Check that cable is straight.
Use lubricant on large cables or semi-rigid cables.
Check there are no slugs or debris caught in cutter head.
Cutter head is getting jammed
Clean out slugs from cutter head.
ALSO SEE THE LAST PAGE OF THE OPERATING MANUAL FOR ADJUSTMENTS.
Resources
1256 Product Page
1256 (Drilled Through) Product Page
Download Operating Manual
Technical Documentation: Coaxial Cable Strippers

Can’t find your answer above?

* Required Fields
Technical Assistance

© Copyright 2022 ∙ The Eraser Company, IncFAQ'sPrivacy Statement