Eraser’s Model WC601B Rotary Blade Tubing Cutter is the ultimate automatic flexible tubing cutter. The unit easily and accurately cuts to length tubing, sleeving and more to the programmed length and number of pieces. Ten feed rates allow the operator to choose the correct rate for a given material to optimize production rate, repeatability, and accuracy of the cut length. The unit is perfect for processing flexible tubing to tight specifications, such as those required for medical tubing.Using a unique combination of an adjustable dual driven belt feed and a rotary cutting head, coupled with a reliable stepper drive system, it achieves results formerly only possible by hand operation. The belt feed and rotary cutter ensures there is no crushing of material, either along its length or on the cut ends. Programming of the unit is simple; a batching feature allows all parameters for frequently run jobs to be pre-programmed. A kitting feature allows for multiple pieces of different lengths to be cut. Quantities of 99 batches and 10 kits may be programmed.
Model MMC71 can cut flat material up to 3.3 inches wide, tubing up to 3/16, seven-inch outer diameter, and wire up to 14 gauge stranded or 16 gauge solid. This cutter works great on flat material, such as heat shrink tubing, tapes, foils, ribbon cable, and more. And is even capable of cutting silicon tubing.
The machine is easily programmable, offering 10 feed rates, 10 cut rates, and storage for up to 99 batches and 10 kits. Material guides are adjustable for each application. Additional guide kits are available to allow multiple pieces of the same material to be cut at the same time, increasing operator efficiency and production rate.
For larger or more robust cutting applications, model MMC200 can cut material up to 3.94 inches wide, tubing up to 5/8, seven-inch outer diameter, and wire up to 10 gauge. Offering a maximum cutting force of 600 pounds. The MMC200 can cut a diverse range of materials, including copper wire and cable, flat and ribbon cable, heat shrink tubing, posing, belting, sleeving, fabrics, and many more.
Depending on the material, the MMC200 is capable of cutting multiple pieces of the same material in one cut. This microprocessor-controlled cutter, can be easily programmed for up to 99 batches and 10 feed rates.
For more information about Eraser’s wide range of wire processing equipment, contact your sales rep today.
Feed Rate #
Maximum Cut Length
Minimum Cut Length
Maximum Material Size
.500" OD (12.7mmø)
Repeatability: +/- 0.005" (0.13mm) to 5% of total length; dependent on material and dereeling system. Squareness of cut: 0 degrees +/- 2 degrees; material dependent.
We recommend using E.C.P. to determine which Eraser machine is best for your specific application.
Click here to download a printable E.C.P. form.
For more information about E.C.P. from Eraser, click here.