PRODUCTS

Dip Strip - 1 lbs.

301.jpg Part Number: BR1302    

One pound (454g) bag of Dip Strip. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed DSP Stripping Pot, Dip Strip melts and wires are immersed in the molten Dip Strip […]

Open Product Page →

Dip Clean 2 Metal Cleaner - 1 pt

1623.jpg Part Number: BR1440    

(1) U.S. pint of Dip Clean 2 Metal Cleaner. For use with DSP and USP Stripping Pots and Dip Strip. After stripping using Dip Strip, the stripped wires are then rinsed in water and Dip Clean 2 Metal Cleaner to remove oxides and stripping residue.Item Details Part Number: BR1440

Open Product Page →

Dip Clean 2 Metal Cleaner - 1 gal

652.jpg Part Number: BR1441    

(1) U.S. gallon of Dip Clean 2 Metal Cleaner. For use with DSP and USP Stripping Pots and Dip Strip. After stripping using Dip Strip, the stripped wires are then rinsed in water and Dip Clean 2 Metal Cleaner to remove oxides and stripping residue.Item Details Part Number: BR1441

Open Product Page →

Nose Cone

896.jpg Part Number: CL0018    

Replacement Nose Cone for use with all DCF units except DCFV, DCFA, DCFB.Item Details Part Number: CL0018

Open Product Page →

Blade Guard

1570.jpg Part Number: CL0024    

Replacement Blade Guard for use with all DCF units except DCFV, DCFA, DCFB, DCFR.Item Details Part Number: CL0024

Open Product Page →

Blade

694.jpg Part Number: CL0149    

Cutting blade for center cuts for use with MR30A (DE0009) portable air operated cutter. Blade cuts 0.130″ OD copper, 0.110″ OD mild steel and .047″ OD piano wire.Item Details Part Number: CL0149

Open Product Page →

Blade

cl0158.jpg Part Number: CL0158    

Cutting blade for end cuts for use with MR30A (DE0009) portable air operated cutter. Blade cuts 0.130″ OD copper, 0.110″ OD mild steel and 0.047″ OD piano wire.Item Details Part Number: CL0158

Open Product Page →

Blade

692.jpg Part Number: CL0159    

Carbide tipped cutting blade for diagonal cuts for use with MR30A (DE0009) portable air operated cutter. Blade cuts 0.130″ OD copper, 0.110″ OD mild steel and 0.047″ OD piano wire.Item Details Part Number: CL0159

Open Product Page →

MR30A Hand-Held Air-Operated Cutter

1683.jpg Part Number: DE0009    

This hand-held air-operated cutter uses 85 PSI and creates 617 lbs. of cutting force. It cuts .130″ OD copper, .110″ OD steel and .047″ OD piano wire with diagonal, clipper or end type cuts depending on die. Diagonal carbide blades are also available. The tool is 7″ long and 2 13/64″ diameter. It weighs 1.2 lbs. […]

Open Product Page →

Replacement protective vinyl tips

383.jpg Part Number: IA0743    

Replacement protective vinyl tips for AA0125/AA0126 (ECT1)Item Details Part Number: IA0743

Open Product Page →

Foot Switch

384.jpg Part Number: IH0129    

Foot switch for bench modelItem Details Part Number: IH0129

Open Product Page →

1/2" Intermittent Element (Pair)

1568.jpg Part Number: IH3511    

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500F (815C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.Item Details Part Number: IH3511

Open Product Page →

1" Wire Guards (Pair)

395.jpg Part Number: IH3551    

One pair of 1″ (25.4mm) Bench Glo-Ring wire guardsItem Details Part Number: IH3551

Open Product Page →

2" Wire Guards (Pair)

398.jpg Part Number: IH3552    

One pair of 2″ (50.8mm) Bench Glo-Ring wire guardsItem Details Part Number: IH3552

Open Product Page →

3" Wire Guards (Pair)

399.jpg Part Number: IH3553    

One pair of 3″ (76.2mm) Bench Glo-Ring wire guardsItem Details Part Number: IH3553

Open Product Page →

1" Intermittent Element (Pair)

402.jpg Part Number: IH4511    

Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.Item Details Part Number: IH4511

Open Product Page →
© Copyright 2024 ∙ The Eraser Company, IncFAQ'sPrivacy Statement