CCB100 Battery Operated Cable Cutter
Description / Details
The CCB100 is a hand held, battery operated cable cutter. With a squeeze of the trigger, this tool will easily cut through cables as large as 1000 kcmil soft drawn copper or aluminum or 750 kcmil hard drawn copper. The CCB100 has a 3 way switch (forward,reverse, and neutral) which allows the operator to make partial cuts, to back off the cable, or to make adjustments during the cutting cycle. The cutting unit, battery, and battery charger are packaged in a plastic carrying case for portability.
Series InformationModels HC10, FC10, and HCA20 Wire and Cable Cutters from The Eraser Company can quickly cut many types and sizes of wire and cable. The HC10 is hand operated by the use of a lever, while the FC10 utilizes a foot pedal to cut material. Both models can cut material up to one-inch outer diameter, depending on material construction. An optional conversion kit is available to change an HC10 to an FC10.
Model HCA20 is air operated and utilizes dual electrical finger switches to activate the blade. This unit can cut wire or cable up to one and one-quarter inches in diameter. All three models incorporate a guillotine style blade to provide a clean cut on a variety of wire and cable.
These cutters pair well with Eraser's WM Series Measuring Meters, which can measure material to a desired length before cutting. The portable CCB100 is a handheld battery-operated cable cutter. With a squeeze of the trigger, this tool will easily cut through cables as large as 1000 kcmil soft drawn copper or aluminum or 750 kcmil hard drawn copper. The cutting unit, battery, and battery charger are packaged in a plastic carrying case.
For more information about Eraser's wide range of wire processing equipment, contact your sales rep today.
|Maximum cable diameter||1000 kcmil soft drawn copper, 750 kcmil hard drawn copper. Do not use on steel.|
|Blades||One fixed one rotating both hardened steel|
|Power||12.0 V DC motor powered by rechargeable NiCad Battery|
|Battery||12.0 V DC sealed nickel cadmium|
|Battery charger||120V 60Hz AC single phase|