DSP8 Stripping Pot

Products » Wire and Cable Strippers » DSP8 Stripping Pot
DSP8 Stripping Pot


Part Number


Description / Details

The DSP Stripping Pots are designed specifically for use with Dip Strip. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed stripping pot, the Dip Strip melts and wires are immersed in the Dip Strip to strip the insulation. The stripped wires are then rinsed in water and Dip Clean Metal Cleaner to remove oxides and residue. Dip Strip does not corrode conductors as will acid strippers. Note: Contact Eraser's Customer Service Department for shipping information.


Stripping Pot Overall Size8" Dia. (203mm) x 2 1/2" deep (57mm). Vessel holds approximately 8lbs of Dip Strip.
Stripping Pot Temperature Range100°- 800°F (37.8°-426.6°C) Internal
Stripping Pot Temperature ControlFeedback Temperature Control
Stripping Pot Power230V 50/60Hz
Dual-Phase Power Supply Required
Dip Strip Melting Temperature500°F (260°C)
Dip Strip Normal Use Temperature700°-750°F (371°-399°C)
Dip Strip Maximum Operating Temperature820°F (438°C)
Dip Strip Stripping Time (test samples)18 AWG (1.02mmø) Polyester insulation - 2 seconds 24 AWG (0.51mmø) Polyester insulation - 1 second 40 AWG (.079mmø) Nylon insulation - 1/2 second

Operating/Safety Manual

DSP8 Stripping Pot

Technical Information Center Articles

Watch Video

  1. We Need Your Reviews!

    Click the button below to add a review for the DSP8 Stripping Pot


Add a Review

Your email address will not be published. Required fields are marked *

© Copyright 2018 - The Eraser Company, Inc