DSP3 Stripping Pot High Output 230V
Description / Details
The DSP stripping pots are designed specifically for use with Dip Strip. The DSP3 has an advanced feedback temperature controller and has a 600 watt heating element to increase the throughput 10 times. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed stripping pot, the Dip Strip melts and wires are immersed in the dip Strip to strip the insulation.The stripped wires are then rinsed in water and Dip Clean Metal Cleaner to remove oxides and residue. Dip Strip does not corrode conductors as will acid strippers. Note: Contact Eraser's Customer Service Department for shipping information.
|Stripping Pot Temperature Range||100°- 800°F (37.8°-426.6°C) Internal|
|Stripping Pot Internal Dimensions||3” (76.2mmø) diameter x 2-1/4” (57.1mm)|
|Stripping Pot Overall Size (vessel only)||6” (152.4mm) high x 6-3/16” (157.1mmø) diameter|
|Stripping Pot Temperature Control||Feedback Temperature Control|
|Stripping Pot Power||230V 50/60Hz |
Dual-Phase Power Supply Required
|Dip Strip Melting Temperature||500°F (260°C)|
|Dip Strip Normal Use Temperature||700°-750°F (371°-399°C)|
|Dip Strip Maximum Operating Temperature||820°F (438°C)|
|Dip Strip Stripping Time (test examples)||18 AWG (1.02mmø)Polyester insulation - 2 seconds 24 AWG (0.51mmø) Polyester insulation - 1 second 40 AWG (.079mmø) Nylon insulation - 1/2 second|
Technical Information Center Articles
E.C.P. (Eraser Certification Program)
We recommend using E.C.P. to determine which Eraser machine is best for your specific application. Click here to download a printable E.C.P. form. For more information about E.C.P. from Eraser, click here.