DSP1 Stripping Pot 230V
Description / Details
The DSP stripping pots are designed specifically for use with Dip Strip. The standard model DSP1 has an infinitely variable temperature control with a reference scale. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed stripping pot, the Dip Strip melts and wires are immersed in the Dip Strip to strip the insulation. The stripped wires are then rinsed in water and Dip Clean Metal Cleaner to remove oxides and residue. Dip Strip does not corrode conductors as will acid strippers. Note: Contact Eraser's Customer Service Department for shipping information.
The DSP series Chemical Wire Strippers from the Eraser company can remove the insulation from magnet and enamel wire, including Litz wire, without damage to the wire. DSP pots are designed specifically for use with Dip Strip. Dip Strip starts as a solid crystal form and melts to a liquid when heated. Wires are immersed in the chemical, which will bubble slightly as the insulation is removed. The stripped wires are then rinsed in water and dip clean to metal cleaner to remove oxides and residue, and then again in water.
Dip Strip does not corrode conductors as will acid strippers. The chemicals do not fume and only normal ventilation is required. Models in the DSP series include the DSP1 and DSP2. These pots can hold one pound of the Dip Strip chemical. The DSP1 has a standard variable temperature control, while the DSP2 features an advanced feedback temperature control. Dip Strip comes in a one pound or two pound bag or a 50 pound bucket. Dip Clean 2 Metal Cleaner is available in a one pint or one gallon container. Dip Strip Neutralizer is also required and as a safe economic method to dispose of Dip Strip after use in the stripping pots. For more information about Eraser's wide range of wire processing equipment, contact your sales rep today.
|Stripping Pot Temperature Range||Approximately 100° - 800°F (37.8° - 426.6°C) Internal (depending on environment and ambient temperature)|
|Stripping Pot Internal Dimensions||3” (76.2mmø) diameter x 2-1/4” (57.1mm)|
|Stripping Pot Overall Size (vessel only)||6” (152.4mm) high x 6-3/16” (157.1mmø) diameter|
|Stripping Pot Temperature Control||Standard Temperature Control|
|Stripping Pot Power||230V 50/60Hz|
|Dip Strip Melting Temperature||500°F (260°C)|
|Dip Strip Normal Use Temperature||700°-750°F (371°-399°C)|
|Dip Strip Maximum Operating Temperature||820°F (438°C)|
|Dip Strip Stripping Time (test examples)||18 AWG (1.02mmø) Polyester insulation - 2 seconds 24 AWG (0.51mmø) Polyester insulation - 1 second 40 AWG (.079mmø) Nylon insulation - 1/2 second|