DSP3 Stripping Pot High Output 230V

Description / Details

The DSP stripping pots are designed specifically for use with Dip Strip. The DSP3 has an advanced feedback temperature controller and has a 600 watt heating element to increase the throughput 10 times. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed stripping pot, the Dip Strip melts and wires are immersed in the dip Strip to strip the insulation.The stripped wires are then rinsed in water and Dip Clean Metal Cleaner to remove oxides and residue. Dip Strip does not corrode conductors as will acid strippers. Note: Contact Eraser’s Customer Service Department for shipping information.

Item Details

Model: DSP3
Part Number: AR1232

Series Information

The DSP series Chemical Wire Strippers from the Eraser company can remove the insulation from magnet and enamel wire, including Litz wire, without damage to the wire. DSP pots are designed specifically for use with Dip Strip.

Dip Strip starts as a solid crystal form and melts to a liquid when heated. Wires are immersed in the chemical, which will bubble slightly as the insulation is removed. The stripped wires are then rinsed in water and dip clean to metal cleaner to remove oxides and residue, and then again in water.

Dip Strip does not corrode conductors as will acid strippers. The chemicals do not fume and only normal ventilation is required. Models in the DSP series include the DSP1 and DSP2. These pots can hold one pound of the Dip Strip chemical.

The DSP1 has a standard variable temperature control, while the DSP2 features an advanced feedback temperature control. Dip Strip comes in a one-pound or two-pound bag or a 50-pound bucket. Dip Clean 2 Metal Cleaner is available in a one-pint or one-gallon container. Dip Strip Neutralizer is also required and as a safe economic method to dispose of Dip Strip after use in the stripping pots.

For more information about Eraser’s wide range of wire processing equipment, contact your sales rep today.

Specifications

Stripping Pot Temperature Range	100°- 800°F (37.8°-426.6°C) Internal
Stripping Pot Internal Dimensions	3” (76.2mmø) diameter x 2-1/4” (57.1mm)
Stripping Pot Overall Size (vessel only)	6” (152.4mm) high x 6-3/16” (157.1mmø) diameter
Stripping Pot Temperature Control	Feedback Temperature Control
Stripping Pot Power	230V 50/60Hz Dual-Phase Power Supply Required
Dip Strip Melting Temperature	500°F (260°C)
Dip Strip Normal Use Temperature	700°-750°F (371°-399°C)
Dip Strip Maximum Operating Temperature	820°F (438°C)
Dip Strip Stripping Time (test examples)	18 AWG (1.02mmø)Polyester insulation - 2 seconds 24 AWG (0.51mmø) Polyester insulation - 1 second 40 AWG (.079mmø) Nylon insulation - 1/2 second